Ercolina CE40 Angle Rolls (CE40MR3 and CE40H3)

Ercolina CE40 angle rolls bend pipe, tube, angle and other profiles into arcs and rings, up to 2 in Sch. 40 pipe and 2 x 2 x 1/4 in angle. Choose the CE40MR3 with manual center roll positioning or the CE40H3 with 10-ton hydraulic positioning and stored programs. Call Icon Machine Tool at (816) 300-0019 for a quote.

Category:

Description

Key Features

  • Two versions: the CE40MR3 has manual center roll positioning with a patented torque multiplier and a digital readout; the CE40H3 has 10-ton hydraulic positioning, an NC touchpad, 8 programs and unlimited passes.
  • Universal tooling included: a 6-5/8 in OD set comes with each machine.
  • Vertical or horizontal: works in either operating position.
  • Roll shafts: forged and precision ground, with threaded shafts and micrometric flange adjustment that helps eliminate spacers.
  • Remote pendant: low-voltage controls and a foot pedal switch.
  • Options: anti-twist device for angle iron “leg in” work, scroll curling, bar twisting, large spiral bending, tie bar and small radius tooling.

Specifications at a Glance

  • Pipe: up to 2 in Sch. 40
  • Angle: up to 2 x 2 x 1/4 in
  • Tube: up to 2-1/2 in, .125 wall
  • Roll shafts: 40 mm; 10 rpm; 10-5/8 in between shafts
  • Power: 220V or 480V 3-phase
  • Weight: 775 lb (CE40MR3); 865 lb (CE40H3)

Who It’s For

Fabricators rolling pipe, tube, angle and flat bar into rings, arcs and railings up to 2 in pipe.

Sales & Service from Icon

Icon Machine Tool sells Ercolina machines across Missouri, Kansas, Oklahoma, Arkansas, eastern Iowa, Indiana, Illinois, Oregon and Washington. Our team helps you choose the right machine and configuration for the parts you make.

Ercolina Catalog Pages (PDF)  Talk to a Specialist: (816) 300-0019