Description
Key Features
- Hitch feed: a 30 in single shuttle with up to three indexes for parts up to 90 in long.
- Short parts: cuts pieces as short as 1/8 in; optional form jaws feed several small-diameter pieces at once for piece counts in the hundreds per hour.
- Clean, square cuts: clamping on both sides of the blade, blade guides on the ferrous model, and ±0.002 in squareness per diameter inch.
- Ferrous or non-ferrous: variable 11 to 177 rpm for steel to match feeds and speeds to each job, or 3,000 rpm for non-ferrous, both with a 5 hp motor.
- Controls: push button controls run the complete cycle, with adjustable stroke and down feed, a length scale in inches and metric, and a piece counter.
- Made in the USA: mist coolant, an interlocking safety hood, ANSI B11.10 compliance, and a two-year warranty on parts.
Specifications at a Glance
- Capacity at 90° (steel): 3-1/2 in round tube; 3 x 3 in square tube; 1-3/4 in round solid
- Capacity at 90° (non-ferrous): 3-1/2 in round solid; 3 x 3 in square solid
- Cut length: 1/8 in minimum; 30, 60 or 90 in with one, two or three indexes
- Tolerance: ±0.006 in per index; ±0.002 in squareness per diameter inch
- Blade and motor: 315 mm blade; 5 hp; 208/230/460 V, 3-phase
- Shipping weight: 1,800 lb
Who It’s For
Production shops cutting short parts from tube and solids in high volumes that need accurate, clean cuts.
Sales & Service from Icon
Icon Machine Tool sells Scotchman machines across Missouri, Kansas, Oklahoma, Arkansas, eastern Iowa, Indiana, Illinois, Oregon and Washington. Our team helps you choose the right machine and configuration for the parts you make.
