Metal Fabrication Equipment

Standard Industrial offers single cylinder, hydra-mechanical press brakes that give full tonnage throughout the stroke and most importantly full tonnage the length of the bed. The advantage of this system allows for off center loading, straight long bends, and less maintenance that with other hydraulic press brakes. Press Brakes are available from 100 to 1,000 tons with models available up to 24' in length. Up to 6 Axis CNC control is available on all models as well. All machines are built in the USA and come with a 5 year warranty.
With full tonnage throughout the stroke and more importantly throughout the entire length of the bed and ram the Standard Industrial brake has a repeatability advantage over most dual cylinder brakes. Direct dual cylinder brakes require complicated hydraulic and electrical systems to balance their tonnage and they require a vast amount of labor and parts as the machines age. Typically the customer is forced to pay exorbitant prices for the parts and labor that they can only get from the manufacturer. We at Standard pride ourselves on the fact that customers can get parts for their brake from local suppliers and the simplicity of the equipment requires only the most basic troubleshooting.

The ram of the press brake is guided by heavy duty slides as used in straight side presses. These slides are located both front and back of each end of the ram and are clearly superior to the small rear mounted guides found on other press brakes.
All press brakes require guides to contain end movement of the ram. Other manufacturers use tiny segmented guides incorporated in the main ram guides. The Standard design is to provide a heavy duty, self aligning system at the rear center of the ram and located inside the press frame. This system requires no operator action when the ram level is adjusted.

For tooling, we recommend Specific and Wila.

• 2D Graphical programming via 10" display
• Up to 7,000+ job storage
• Infinite off-line job storage via USB port
• Fully supported by Standard Industrial
• Available with X, R, Z1-Z2, X1-X2, R1-R2 axis
• Operator prompts and on-line help messages
• USB Flash Drive
• Provides step by step instructions for part forming

• Walks operator through part construction
• 2D Graphical Off-line Software (optional)
• Bend simulation checks for interference & overload