6509-24M - STANDARD FEATURES

Available in 40, 45, 50, 65, 90, and 120 ton. Shown is a 65 ton.

• 65 ton punch station (1-1/16" in 3/4")
• Keyed punch ram for safety
• 9" throat depth
• Punch gauging table w/fence and scale
• Die holder complete with 2" die insert
  punch nut with wrench and stripper
• One round punch & die: Max. Dia. 1-1/4"
• Punch jog control
• Adjustable electric stroke control with scale
• Electric remote foot pedal
• 24" flat bar shear with 4-way reversible
  blade (1" x 6", 1/4" x 24")
• Angle shear capacity
  6" x 6" x 3/8" and 5" x 5" x 1/2"
• Tool table work area
• Two-stage hydraulic pump
• Electrical box supplied with emergency palm button and lock-out tag-out accommodations
• 230/460 volt / 3 Phase electrics (must specify voltage)
• All guards necessary to comply with
  ANSI B 11-5 Standards
• Fork lift accommodations
• One-year warranty
• Made in USA

DO 8514-20M - STANDARD FEATURES

• Dual operator allows for two operators to work at the same time at full capacity
• 85 ton punch station (1-1/16" in 1")
• Keyed punch ram for positive and safe punch alignment
• 14" throat depth
• Punch gauging table with fence and scale
• Die holder complete with 2" die insert
  for #82 dies, punch nut with wrench
  adjustable swing-away stripper
• One round punch & die: max. diameter 1-1/4"
• Punch jog control
• Two adjustable electric stroke controls with scale
• Two electric remote foot pedals
• Two 2-stage hydraulic pumps
• Two valves
• 6" x 6" x 1/2" slug-less angle shear
• Built-in rectangle notcher: 2" x 4" x 1/2"
• Notcher station can be converted to open end brake
• 20" flat bar shear with 4-way reversible
  blade (1" x 6", 3/8" x 24")
• Low rake angle for minimal distortion
• Shear table with scale and miter fence
• Rod shear: 1/2", 3/4", 1", 1-1/2" round
  and 1-1/2" square
• Slug receptacles
• Electrical box supplied with emergency palm button and lock-out tag-out accommodations
• 230 or 460 volt / 3 ph electrics
• All guards necessary to comply with
  ANSI B 11-5 Standards
• Fork lift accommodations
• One year warranty

FI 5109 14M - STANDARD FEATURES

Also available in 85 ton capacity.

• 51 Ton Punch Station (1-1/16" in 5/8")
• Keyed punch ram for safety
• 9" throat depth
• Die holder complete with 2" die insert
• Punch nut with wrench
• Adjustable swing-away stripper
• One round punch & die: max. diameter 1-1/4"
• Punch jog control
• Adjustable electric stroke control with scale
• Electric remote foot pedal
• Angle shear capacity
  5" x 5" x 3/8" and 4" x 4" x 1/2"
• 14" flat bar shear with 4-way reversible blade (1" x 8", 1/2" x 14")
• Low rake angle for minimal distortion
• Rectangle notcher capacity
  2-1/2" x 4" x 3/8" and 2-1/2" x 5" x 5/16"
• Two-stage hydraulic pump
• Electrical box supplied with emergency palm button and lock-out tag-out accommodations
• 230/460 Volt / 3 Phase electrics (must specify voltage)
• All guards necessary to comply with
  ANSI B 11-5 Standards
• Fork lift accommodations
• Lifting eye
• One year warranty

5014-TM - STANDARD FEATURES

• 50 ton punch station with 3-station revolving turret (1-1/4" in 1/2")
• Keyed punch ram for safety
• 4" throat depth
• Three 2" die holders, three punch nuts with wrench and three strippers
• One round punch & die: Max. Dia. 1"
• Adjustable stroke control
• Angle shear 4" x 4" x 3/8" and
  2" x 2" x 1/4" at 45 degrees
• 14" flat bar shear with 4-way reversible
  blade (3/4" x 4", 1/4" x 14")
• Low rake angle for minimal distortion
• Rectangular notcher, 2-1/2" x 3" x 5/16"
• Tool table work area
• Electrical box supplied with emergency palm button and lock-out tag-out accommodations
• 230/460 volt / 3 phase electrics (must specify voltage)
• All guards necessary to comply with
  ANSI B 11-5 Standards
• Fork lift accommodations
• One-year warranty
• Made in USA

Back to top