Icon Machine Tool, Inc.

SCOTCHMAN COLD SAWS

Scotchman is the best selling cold saw in the industry. Saws are available for all applications and production requirements. Choose from manual or fully automatic systems. Each saw is built with heavy duty components for maximum longevity. Check out the options too. Most saws are in stock and ready for work, call today!

CPO275 Manual Saw

American made
7 gallon coolant tank with pump
Double self-centering vise assures burr-free cuts
Miter capabilities 135, 90 left and 45 degrees right
Worm and worm wheel gear box. Worm is hardened and ground of top quality bronze.
Capable of slotting
Material length stop 30 inches
One HSS blade 10 inch diameter (250mm)
Two cutting speeds
One gallon of coolant
One blade wrench
Completely assembled and ready for operation
Warranty: one year parts
Manual clamp for material vise operator
Control trigger switch
Miter locking device stops at 45 degrees left, straight 90 degrees and 45 degrees right

Maximum Capacities
Tubing	*90 Degree*	*45 Degree*
Round	3 3/8"	2 1/2"
Square	3" x 3"	2 3/8" x 2 3/8"
Rectangle	3 1/2" x 2 3/8"	2 5/8" x 2 5/8"
Solid	*90 Degree*	*45 Degree*
Round	1 1/2"	1"
Square	1 1/2" x 1 1/2"	1" x 1"

CPO350 Manual Saw

American made
Double self-centering vise assures burr-free cuts
Miter capabilities 135, 90 left and 45 degrees right
Miter locking device stops at 45 degrees left, straight 90 degrees and 45 degrees right
Double reduction gear box. Both gears are hardened and ground.
Worm wheel of top quality bronze
Capable of slotting
Material length stop 30 inches
One HSS blade 12 1/2 inch diameter (315mm)
Two cutting speeds
7 gallon coolant tank with pump
One gallon coolant
One blade wrench
Completely assembled and ready for operation
Warranty: One year parts
Manual clamp for material vise
Operator control trigger switch

Maximum Capacities
Tubing	90 Degree	45 Degree
Round	4 7/8 "	4 3/8"
Square	4 1/2" x 4 1/2"	4" x 4"
Rectangle	5 1/4" x 4"	4" x 4"
Solid	90 Degree	45 Degree
Round	2"	1 3/4 "
Square	2" x 2"	1 3/4 " x 1 3/4"

CPO350NF Manual Saw

American made
Double self-centering vise assures burr-free cuts
Miter capabilities 135, 90 left and 45 degrees right
Miter locking device - quick accurate settings. Stops at 45 left, straight 90 and 45 degrees right.
Belt driven
Capable of slotting
Material length stop 30 inches
One 13 1/2 inch diameter (338mm) carbide tipped blade
Two cutting speeds
One gallon coolant tank with mist lubrication system
One gallon coolant
One blade wrench
Completely assembled and ready for operation
Warranty: One year parts
Manual clamp for material vise
Operator control trigger switch

Maximum Capacities
Tubing	90 Degree	45 Degree
Round	4 1/2"	4"
Square	4 1/4" x 4 1/4"	4" x 4"
Rectangle	5 1/2" x 4"	4" x 4"
Solid	90 Degree	45 Degree
Round	3"	2 1/2"
Square	3" x 3"	2 1/2" x 2 1/2"

CLM350SA Column 14" Semi-Automatic Saw

Ridged column design
Head miters 45 left and 45 degrees right
Vise complete with anti-burr device
Way lubrication system
Steel stand
Two cutting speeds 12 rpm and 25 rpm
One 14 inch diameter (350mm) high speed steel blade
Material length stop 30 inches
One gallon coolant
One blade wrench
Completely assembled and ready for operation
Warranty: One year parts
Hydraulic operated power clamp for material vise
Hydraulic operated power down feed
Emergency stop button

Maximum Capacities
Tubing	90 Degree	45 Degree
Round	4 1/2"	4"
Square	4" x 4"	4" x 4"
Rectangle	6" x 4"	5" x 4"
Solid	90 Degree	45 Degree
Round	4"	3"
Square	4" x 4"	3" x 3"

CPO 350 NF PKPD Semi-Automatic Saw
(shown with Advanced Feed System)

Semi-Automatic Cycle
Pneumatic Power Down Feed with Electric Controls
Separate Feed Control of both Feed Rate and Feed Pressure
Power Double Self-Centering Vise Assures Burr-Free Cuts
Emergency Stop Button
Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
Miter Locking Devise Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
Capable of Slotting
Two Cutting Speeds
Double Reduction, Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
7 Gallon Coolant Tank with Pump
30" Material Length Stop
One 12-1/2" Diameter (315 mm) HSS Blade
230 or 460 Volt /3 Phase Electrics (must specify voltage)
Warranty: One Year Parts
Made in USA

CPO 315 HFA Automatic Saw

Fully Automatic Cycle
Push Button Controls Actuate the Complete Cycle
5 H.P. Variable RPM Speed Control (Ferrous Model)
3.8 H.P. - 3,000 RPM (Non-Ferrous Model)
Interlocking Safety Hood
Clamping Both Sides of Blade - Highest Quality, Burr-Free Cuts
Blade Guides for Accurate Tolerances (Ferrous Model)
Flood Coolant (Ferrous Model)
Mist Coolant (Non-ferrous Model)
Adjustable Stroke Control on the Saw Head
Adjustable Down Feed Control on the Saw Head for Feed Pressure and Feed Rate
Piece Counter
Length Scale in Both Inches and Metric
Quick and Easy Fine Adjustment Length Setting
Warranty: One Year Parts
Made in USA
Optional: Mist Coolant Form Jaws for Multiple Tubes Digital Read-out for Quick Easy Length Setting Ten Foot or Twenty Foot Material Supply Track

CPO 315 RFA/ST Automatic Saw

Automatic Tube Ejection
Clamping Both Sides of Blade - Highest Quality, Burr-Free Cuts
5 H.P. Variable RPM Speed Control (Ferrous Model)
3.8 H.P. - 3,000 RPM (Non-ferrous Model)
Interlocking Safety Hood
Blade Guides for Accurate Tolerances (Ferrous Model)
Trim and Remnant Gate
Adjustable Stroke Control on the Saw Head for Feed Pressure and Feed Rate
Piece Counter
Length Scale in Both Inches and Metric
Digital Read-out for Quick and Easy Fine Adjustment of Length Setting
Supply table takes up to 24' material
Mist Coolant System (Ferrous Model)
One Saw Blade
One Gallon Concentrated Coolant
Warranty: One Year Parts
Made in USA
Optional Features:
In-line Deburring Unit
Flood Coolant
Longer Cut Lengths - 90" or 120"
Bundle Loader Magazine

SCOTCHMAN COLD SAW OPTIONS

CPO 350 Square Tube Jaws

Two speed Switch with Variable Speed Control. Recommended for cutting multiple shapes, sizes and thicknesses. RPM can be fine tuned to achieve optimum blade speed for each application, and increase blade life.

Special Clamping Fixture

Miter Locking Device STANDARD FEATURE (Not available for 275PK or 275PKPD models)

CPO 275 Square Tube Jaws

48", 84" and 120" material stop with scale, or digital readout

10' and 20' Material Supply Track

SPECIAL NOTE: For the customer using single phase power: The variable speed allows a 3 phase machine to operate with 220 volt 1 phase power without loss of power.